To flash this image:
   1. set SW1[switch on the board] to A,
   2. type:
      ./boot_etraxfs -d ethX -F -i ./fimage, 
      where ethX is ethernet interface

      If you see something like this:
         Using internal boot loader: INTERNAL_NW - Network boot (default).
         Using internal boot loader: INTERNAL2 - Level2 boot.
         Starting boot...

      and nothing happen, it means that:
         1. you were using wrong ethernet interface(ethX). It should be usually eth0 or eht1.
         2. switch SW1 on the TRB isn't A
         3. there is no physical connection between TRB and the image-develop computer.

      If you see 
         SET_REGISTER
         0xb001a048
         0x000fffff
         SET_REGISTER
         0xb001a050
         0x00000000
         SET_REGISTER
         0xb001a058
         0x000fffff
         PACKET_INFO
         0xc0004000
         0x003da000
         JUMP
         Exiting with code 0
      but after more or less 1 minute you cannot connect with the TRB:
         1. check in the /var/log/messages(as root on the image-develop), if TRB got DHCPACK(DHCP server log)
   3. set SW1 tp 0

• flashTool.tar: dD