Difference: BookkeepingTrb3 (1 vs. 53)

Revision 53
Changes from r51 to r53
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only with external linear power supply
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 Wuppertal x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 GSI @Wu x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit, repaired
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x Pion Tracker, cave
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119 GSI x
120 GSI x
121 GSI x
122 GSI x
123 GSI x
124 GSI x
125 GSI x
126 GSI x Initial problems with DHCP offer during programming, but problem seems to be solved
127 GSI x
128 GSI x
129 GSI x
130 GSI x
-- JanMichel - 07 May 2012
>
>

This list is now located on the TRB3 webpage. Please edit it there!

Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only with external linear power supply
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 Wuppertal x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 Heidelberg x Christian Simon, Uni HD
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 GSI @Wu x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit, repaired
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x Pion Tracker, cave
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x
104
105
106
107
108
109
110
111
112
113
114 Heidelberg Christian Simon, Uni HD
115 Heidelberg Christian Simon, Uni HD
116 Heidelberg Christian Simon, Uni HD
117
118
119 Heidelberg x Christian Simon, Uni HD
120 Heidelberg x Christian Simon, Uni HD
121 Heidelberg x Christian Simon, Uni HD
122 GSI x
123 GSI x
124 GSI x
125 GSI x
126 GSI x Initial problems with DHCP offer during programming, but problem seems to be solved
127 GSI x
128 GSI x
129 GSI x
130 GSI x Christian Simon, Uni HD

This list is now located on the TRB3 webpage. Please edit it there!

Revision 51
Changes from r49 to r51
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only with external linear power supply
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 Wuppertal x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 GSI @Wu x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit, repaired
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x Pion Tracker, cave
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x

104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119 GSI x
-- JanMichel - 07 May 2012
>
>
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only with external linear power supply
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 Wuppertal x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 GSI @Wu x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit, repaired
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x Pion Tracker, cave
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119 GSI x
120 GSI x
121 GSI x
122 GSI x
123 GSI x
124 GSI x
125 GSI x
126 GSI x Initial problems with DHCP offer during programming, but problem seems to be solved
127 GSI x
128 GSI x
129 GSI x
130 GSI x
-- JanMichel - 07 May 2012
Revision 49
Changes from r47 to r49
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only with external linear power supply
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 ? x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 Heidelberg x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit, repaired
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x Pion Tracker, cave
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x
-- JanMichel - 07 May 2012
>
>
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only with external linear power supply
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 Wuppertal x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 GSI @Wu x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit, repaired
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x Pion Tracker, cave
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x

104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119 GSI x
-- JanMichel - 07 May 2012
Revision 47
Changes from r45 to r47
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 ? x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 Heidelberg x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x
-- JanMichel - 07 May 2012
>
>
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only with external linear power supply
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 ? x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 Heidelberg x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit, repaired
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x Pion Tracker, cave
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x
-- JanMichel - 07 May 2012
Revision 45
Changes from r43 to r45
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X  
3 Mainz    
4 Cracow    
5 Mainz    
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
8 Mainz   no access to Flash 1 - fixed
9 Mainz   DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ?   not existing board?
11 Erlangen/WASA x  
12 Mnchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gieen, Benno Kroek   Seems that the 3.3V are missing on the AddOn-Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x  
17 Mainz A2 x  
18 Mainz A2 x  
19 Mainz A2 x  
20 Erlangen/WASA x  
21 GSI x  
22 Erlangen/WASA x  
23 Erlangen/WASA x  
24 Erlangen/WASA x  
25 Erlangen/WASA x  
26 Erlangen/WASA x  
27 Erlangen/WASA x  
28 GSI x  
29 ? x  
30 GSI x  
31 Krakow/Marek x  
32 Krakow/Marek x  
33 Munich/Rafal x  
34 GSI x  
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x  
37 Mainz x  
38 Mainz x  
39 Mainz x  
40 Mainz x  
41 KVI x  
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x  
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x  
47 Heidelberg x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x  
49 GSI x  
50 GSI x  
51 GSI x  
52 GSI x  
53 GSI x  
54 GSI x  
55 GSI x  
56 GSI x  
57 GSI x  
58 GSI x  
59 GSI x  
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x  
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x  
72 GSI x  
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x  
76 Giessen x  
77 Giessen x  
78 GSI x  
79 Giessen x  
80 GSI x  
81 GSI x  
82 GSI x  
83 GSI x  
84 GSI x  
85 GSI x  
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x  
89 GSI x  
90 Frankfurt x  

-- JanMichel - 07 May 2012
>
>
Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X
3 Mainz
4 Cracow
5 Mainz
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
8 Mainz no access to Flash 1 - fixed
9 Mainz DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10 ? not existing board?
11 Erlangen/WASA x
12 M�nchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gie�en, Benno Kroek Seems that the 3.3V are missing on the AddOn -Connectors
14 KVI x only lent, no errors known
15 GSI x Edge AddOn4: power blades are not connected
16 Erlangen/WASA x
17 Mainz A2 x
18 Mainz A2 x
19 Mainz A2 x
20 Erlangen/WASA x
21 GSI x
22 Erlangen/WASA x
23 Erlangen/WASA x
24 Erlangen/WASA x
25 Erlangen/WASA x
26 Erlangen/WASA x
27 Erlangen/WASA x
28 GSI x
29 ? x
30 GSI x
31 Krakow/Marek x
32 Krakow/Marek x
33 Munich/Rafal x
34 GSI x
35 Jerusalem/PSI x Lent to Guy Ron
36 Mainz x
37 Mainz x
38 Mainz x
39 Mainz x
40 Mainz x
41 KVI x
42 GSI x Lent to Guy Ron
43 GSI x Evie Downie, Washington, only lent
44 GSI x
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x
47 Heidelberg x RESET_OR doesn't work, not possible to reboot central FPGA
48 GSI x
49 GSI x
50 GSI x
51 GSI x
52 GSI x
53 GSI x
54 GSI x
55 GSI x
56 GSI x
57 GSI x
58 GSI x
59 GSI x
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x back to GSI, DCDC2 broken, short circuit
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x
72 GSI x
73 GSI x Two temperature sensors stop working higher than 30 degrees.
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x
76 Giessen x
77 Giessen x
78 GSI x
79 Giessen x
80 GSI x
81 GSI x
82 GSI x
83 GSI x
84 GSI x
85 GSI x
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
88 Frankfurt x
89 GSI x
90 Frankfurt x
91 GSI x
92 GSI x
93 GSI x
94 GSI x No DHCP req. after programming
95 GSI x
96 GSI x
97 GSI x
98 GSI x DONE3 LED does not glow
99 GSI x
100 GSI x
101 GSI x
102 GSI x
103 GSI x
-- JanMichel - 07 May 2012
Revision 43
Changes from r41 to r43
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 15 to 15
 
12 Mnchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13 Gieen, Benno Kroek   Seems that the 3.3V are missing on the AddOn-Connectors
14 KVI x only lent, no errors known
Changed:
<
<
15 ? x  
>
>
15 GSI x Edge AddOn4: power blades are not connected
 
16 Erlangen/WASA x  
17 Mainz A2 x  
18 Mainz A2 x  
Line: 28 to 28
 
25 Erlangen/WASA x  
26 Erlangen/WASA x  
27 Erlangen/WASA x  
Changed:
<
<
28 Erlangen/WASA x  
>
>
28 GSI x  
 
29 ? x  
30 GSI x  
31 Krakow/Marek x  
Line: 72 to 72
 
69 Frankfurt x  
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 Erlangen/WASA x  
Changed:
<
<
72 Erlangen/WASA x  
73 GSI x  
>
>
72 GSI x  
73 GSI x Two temperature sensors stop working higher than 30 degrees.
 
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
75 GSI x  
76 Giessen x  
Revision 41
Changes from r39 to r41
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 74 to 74
 
71 Erlangen/WASA x  
72 Erlangen/WASA x  
73 GSI x  
Changed:
<
<
74 GSI x connection problem by central FPGA - BCM one pin not soldered(SOLVED)
>
>
74 Frankfurt x BCM one pin not soldered(SOLVED). 2 temperature sensors not working.
 
75 GSI x  
76 Giessen x  
77 Giessen x  
Line: 88 to 88
 
85 GSI x  
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
Changed:
<
<
88 GSI x  
>
>
88 Frankfurt x  
 
89 GSI x  
Changed:
<
<
90 GSI x Missing Ethernet link and no connection to peripheral FPGAs
>
>
90 Frankfurt x  
 

-- JanMichel - 07 May 2012
Revision 39
Changes from r37 to r39
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 71 to 71
 
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x  
70 GSI x can't reach FPGA 1&2 with slowcontrol
Changed:
<
<
71 GSI x  
72 GSI x  
>
>
71 Erlangen/WASA x  
72 Erlangen/WASA x  
 
73 GSI x  
Changed:
<
<
74 GSI x BCM one pin not soldered
>
>
74 GSI x connection problem by central FPGA - BCM one pin not soldered(SOLVED)
 
75 GSI x  
76 Giessen x  
77 Giessen x  
Line: 87 to 87
 
84 GSI x  
85 GSI x  
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
Changed:
<
<
87 GSI x Power supply error
>
>
87 GSI x Power supply error - Overload/overcurrent LED is on - possible short curcuit
 
88 GSI x  
89 GSI x  
Added:
>
>
90 GSI x Missing Ethernet link and no connection to peripheral FPGAs
 

-- JanMichel - 07 May 2012
Revision 37
Changes from r35 to r37
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X  
3 Mainz    
Changed:
<
<
4 Cracow   Inverted 125MHz oscillator - fixed
>
>
4 Cracow    
 
5 Mainz    
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
Line: 35 to 35
 
32 Krakow/Marek x  
33 Munich/Rafal x  
34 GSI x  
Changed:
<
<
35 GSI x Lent to Guy Ron
>
>
35 Jerusalem/PSI x Lent to Guy Ron
 
36 Mainz x  
37 Mainz x  
38 Mainz x  
Line: 64 to 64
 
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
Changed:
<
<
64 GSI x Vincent Sulkosky, JLAB, only lent
>
>
64 GSI x back to GSI, DCDC2 broken, short circuit
 
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
Changed:
<
<
68 Mainz x PANDA, Tobias Wagner (not payed up to now
69 Munich/Rafal x  
>
>
68 Mainz x PANDA, Tobias Wagner
69 Frankfurt x  
 
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 GSI x  
72 GSI x  
73 GSI x  
Changed:
<
<
74 GSI x Power supply error
>
>
74 GSI x BCM one pin not soldered
 
75 GSI x  
76 Giessen x  
77 Giessen x  
Line: 86 to 86
 
83 GSI x  
84 GSI x  
85 GSI x  
Changed:
<
<
86 GSI x Power supply error
>
>
86 GSI x Short circuit by BCM, will be sent back to Visatronic for repair
 
87 GSI x Power supply error
88 GSI x  
89 GSI x  
Revision 35
Changes from r33 to r35
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 68 to 68
 
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
Changed:
<
<
68 Mainz x PANDA, Tobias Weber
69 Frankfurt x  
>
>
68 Mainz x PANDA, Tobias Wagner (not payed up to now
69 Munich/Rafal x  
 
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 GSI x  
72 GSI x  
Line: 86 to 86
 
83 GSI x  
84 GSI x  
85 GSI x  
Changed:
<
<
86 GSI x FPGA programming failed
>
>
86 GSI x Power supply error
87 GSI x Power supply error
88 GSI x  
89 GSI x  
 

-- JanMichel - 07 May 2012
Revision 33
Changes from r31 to r33
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 68 to 68
 
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
Changed:
<
<
68 Mainz x PANDA, Tobias Wagner (not payed up to now
>
>
68 Mainz x PANDA, Tobias Weber
 
69 Frankfurt x  
70 GSI x can't reach FPGA 1&2 with slowcontrol
71 GSI x  
Line: 81 to 81
 
78 GSI x  
79 Giessen x  
80 GSI x  
Added:
>
>
81 GSI x  
82 GSI x  
83 GSI x  
84 GSI x  
85 GSI x  
86 GSI x FPGA programming failed
 

-- JanMichel - 07 May 2012
Revision 31
Changes from r29 to r31
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 76 to 76
 
73 GSI x  
74 GSI x Power supply error
75 GSI x  
Changed:
<
<
76 GSI x  
77 GSI x  
>
>
76 Giessen x  
77 Giessen x  
 
78 GSI x  
Changed:
<
<
79 GSI x  
>
>
79 Giessen x  
80 GSI x  
 

-- JanMichel - 07 May 2012
Revision 29
Changes from r27 to r29
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 71 to 71
 
68 Mainz x PANDA, Tobias Wagner (not payed up to now
69 Frankfurt x  
70 GSI x can't reach FPGA 1&2 with slowcontrol
Added:
>
>
71 GSI x  
72 GSI x  
73 GSI x  
74 GSI x Power supply error
75 GSI x  
76 GSI x  
77 GSI x  
78 GSI x  
79 GSI x  
 

-- JanMichel - 07 May 2012
Revision 27
Changes from r25 to r27
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 13 to 13
 
10 ?   not existing board?
11 Erlangen/WASA x  
12 Mnchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
Changed:
<
<
13      
>
>
13 Gieen, Benno Kroek   Seems that the 3.3V are missing on the AddOn-Connectors
 
14 KVI x only lent, no errors known
15 ? x  
16 Erlangen/WASA x  
Line: 35 to 35
 
32 Krakow/Marek x  
33 Munich/Rafal x  
34 GSI x  
Changed:
<
<
35 GSI x  
>
>
35 GSI x Lent to Guy Ron
 
36 Mainz x  
37 Mainz x  
38 Mainz x  
39 Mainz x  
40 Mainz x  
41 KVI x  
Changed:
<
<
42 GSI x  
>
>
42 GSI x Lent to Guy Ron
 
43 GSI x Evie Downie, Washington, only lent
44 GSI x  
45 GSI x NA61, Jovan Puzovic, Belgrade
Line: 70 to 70
 
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner (not payed up to now
69 Frankfurt x  
Changed:
<
<
70 GSI x  
>
>
70 GSI x can't reach FPGA 1&2 with slowcontrol
 

-- JanMichel - 07 May 2012
Revision 25
Changes from r23 to r25
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 14 to 14
 
11 Erlangen/WASA x  
12 Mnchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13      
Changed:
<
<
14 Wuppertal x no errors known
>
>
14 KVI x only lent, no errors known
 
15 ? x  
16 Erlangen/WASA x  
17 Mainz A2 x  
Line: 43 to 43
 
40 Mainz x  
41 KVI x  
42 GSI x  
Changed:
<
<
43 GSI x Evie Downie, Washington, only borrowed
>
>
43 GSI x Evie Downie, Washington, only lent
 
44 GSI x  
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x  
Changed:
<
<
47 GSI x  
>
>
47 Heidelberg x RESET_OR doesn't work, not possible to reboot central FPGA
 
48 GSI x  
49 GSI x  
50 GSI x  
Line: 60 to 60
 
57 GSI x  
58 GSI x  
59 GSI x  
Changed:
<
<
60 GSI x  
61 GSI x  
62 GSI x  
63 GSI x  
64 GSI x Vincent Sulkosky, JLAB, only borrowed
>
>
60 GSI x Mainz - lent for the July2013 test beams
61 GSI x Mainz - lent for the July2013 test beams
62 GSI x Mainz - lent for the July2013 test beams
63 GSI x Mainz - lent for the July2013 test beams
64 GSI x Vincent Sulkosky, JLAB, only lent
 
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
Revision 23
Changes from r21 to r23
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 64 to 64
 
61 GSI x  
62 GSI x  
63 GSI x  
Changed:
<
<
64 GSI x  
65 GSI x  
66 GSI x  
67 GSI x  
68 GSI x  
>
>
64 GSI x Vincent Sulkosky, JLAB, only borrowed
65 Mainz x A2, Andreas Neiser
66 Mainz x A2, Andreas Neiser
67 Mainz x A2, Andreas Neiser
68 Mainz x PANDA, Tobias Wagner (not payed up to now
 
69 Frankfurt x  
70 GSI x  
Revision 21
Changes from r19 to r21
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 43 to 43
 
40 Mainz x  
41 KVI x  
42 GSI x  
Changed:
<
<
43 GSI x  
>
>
43 GSI x Evie Downie, Washington, only borrowed
 
44 GSI x  
45 GSI x NA61, Jovan Puzovic, Belgrade
46 GSI x  
Line: 51 to 51
 
48 GSI x  
49 GSI x  
50 GSI x  
Changed:
<
<
>
>
51 GSI x  
52 GSI x  
53 GSI x  
54 GSI x  
55 GSI x  
56 GSI x  
57 GSI x  
58 GSI x  
59 GSI x  
60 GSI x  
61 GSI x  
62 GSI x  
63 GSI x  
64 GSI x  
65 GSI x  
66 GSI x  
67 GSI x  
68 GSI x  
69 Frankfurt x  
70 GSI x  
 

-- JanMichel - 07 May 2012
Revision 19
Changes from r17 to r19
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 36 to 36
 
33 Munich/Rafal x  
34 GSI x  
35 GSI x  
Changed:
<
<
36 Mainz (sold) x  
37 Mainz (sold) x  
38 Mainz (sold) x  
39 Mainz (sold) x  
40 Mainz (sold) x  
41 GSI x  
>
>
36 Mainz x  
37 Mainz x  
38 Mainz x  
39 Mainz x  
40 Mainz x  
41 KVI x  
 
42 GSI x  
43 GSI x  
44 GSI x  
Changed:
<
<
45 GSI x  
>
>
45 GSI x NA61, Jovan Puzovic, Belgrade
 
46 GSI x  
47 GSI x  
48 GSI x  
Revision 17
Changes from r15 to r17
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 30 to 30
 
27 Erlangen/WASA x  
28 Erlangen/WASA x  
29 ? x  
Added:
>
>
30 GSI x  
 
31 Krakow/Marek x  
32 Krakow/Marek x  
33 Munich/Rafal x  
34 GSI x  
35 GSI x  
Changed:
<
<
36 GSI x  
37 GSI x  
38 GSI x  
39 GSI x  
40 GSI x  
>
>
36 Mainz (sold) x  
37 Mainz (sold) x  
38 Mainz (sold) x  
39 Mainz (sold) x  
40 Mainz (sold) x  
 
41 GSI x  
42 GSI x  
43 GSI x  
Revision 15
Changes from r13 to r15
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
1 Frankfurt X patch wire fixed
SFP1 fixed
Line: 10 to 10
 
7 Frankfurt - no communication with FPGA 2
8 Mainz   no access to Flash 1 - fixed
9 Mainz   DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
Changed:
<
<
10     not existing board?
11 GSI x  
>
>
10 ?   not existing board?
11 Erlangen/WASA x  
 
12 Mnchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13      
14 Wuppertal x no errors known
Changed:
<
<
15   x  
16   x  
>
>
15 ? x  
16 Erlangen/WASA x  
 
17 Mainz A2 x  
18 Mainz A2 x  
19 Mainz A2 x  
20 Erlangen/WASA x  
Changed:
<
<
21 Erlangen/WASA x  
>
>
21 GSI x  
 
22 Erlangen/WASA x  
23 Erlangen/WASA x  
24 Erlangen/WASA x  
Line: 29 to 29
 
26 Erlangen/WASA x  
27 Erlangen/WASA x  
28 Erlangen/WASA x  
Changed:
<
<
29 Erlangen/WASA x  
>
>
29 ? x  
31 Krakow/Marek x  
32 Krakow/Marek x  
33 Munich/Rafal x  
34 GSI x  
35 GSI x  
36 GSI x  
37 GSI x  
38 GSI x  
39 GSI x  
40 GSI x  
41 GSI x  
42 GSI x  
43 GSI x  
44 GSI x  
45 GSI x  
46 GSI x  
47 GSI x  
48 GSI x  
49 GSI x  
50 GSI x  
 

-- JanMichel - 07 May 2012
Revision 13
Changes from r11 to r13
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
Serial Number Location Flash 0R fix Errors, Bugs, Special Features
>
>
Serial Number current Location Flash with 0R Errors, Bugs, Special Features
 
1 Frankfurt X patch wire fixed
SFP1 fixed
2 Frankfurt X  
3 Mainz    
Line: 9 to 9
 
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
8 Mainz   no access to Flash 1 - fixed
Changed:
<
<
9 Mainz   DCDC4 (1,8 V) doesn't function - not fixed
no access to Flash 4 - fixed
10      
>
>
9 Mainz   DCDC4 (1,8 V) doesn't work - not fixed
no access to Flash 4 - fixed
10     not existing board?
 
11 GSI x  
Changed:
<
<
12 Mnchen x  
>
>
12 Mnchen x all 4 Samtec-connectors have no contact on 3.3V and 6V
13      
14 Wuppertal x no errors known
15   x  
16   x  
17 Mainz A2 x  
18 Mainz A2 x  
19 Mainz A2 x  
20 Erlangen/WASA x  
21 Erlangen/WASA x  
22 Erlangen/WASA x  
23 Erlangen/WASA x  
24 Erlangen/WASA x  
25 Erlangen/WASA x  
26 Erlangen/WASA x  
27 Erlangen/WASA x  
28 Erlangen/WASA x  
29 Erlangen/WASA x  
 

-- JanMichel - 07 May 2012
Revision 11
Changes from r9 to r11
Line: 1 to 1
 
Serial Number Location Flash 0R fix Errors, Bugs, Special Features
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
1 GSI X patch wire fixed
SFP1 fixed
>
>
1 Frankfurt X patch wire fixed
SFP1 fixed
 
2 Frankfurt X  
3 Mainz    
Changed:
<
<
4 Cracow   Inverted 125MHz oscillator - fixed
>
>
4 Cracow   Inverted 125MHz oscillator - fixed
 
5 Mainz    
Changed:
<
<
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
8 Mainz   no access to Flash 1 - fixed
9 Mainz   DCDC4 (1,8 V) doesn't function - not fixed & no access to Flash 4 - fixed
>
>
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
8 Mainz   no access to Flash 1 - fixed
9 Mainz   DCDC4 (1,8 V) doesn't function - not fixed
no access to Flash 4 - fixed
 
10      
Changed:
<
<
11      
>
>
11 GSI x  
12 Mnchen x  
 

-- JanMichel - 07 May 2012
Revision 9
Changes from r7 to r9
Line: 1 to 1
 
META TOPICPARENT name="TDCReadoutBoardV3"
Serial Number Location Flash 0R fix Errors, Bugs, Special Features
1 GSI X patch wire fixed
SFP1 fixed
Line: 8 to 8
 
5 Mainz    
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
Changed:
<
<
8 Mainz   no access to Flash 1
9 Mainz   DCDC4 (1,8 V) doesn't function
>
>
8 Mainz   no access to Flash 1 - fixed
9 Mainz   DCDC4 (1,8 V) doesn't function - not fixed & no access to Flash 4 - fixed
 
10      
11      
Revision 7
Changes from r5 to r7
Line: 1 to 1
 
Serial Number Location Flash 0R fix Errors, Bugs, Special Features
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
1 Frankfurt FPGA 5 only patch wire for broken Flash-CLK on FPGA 5
SFP1 slot broken (mechanical problem, pressing the SFP on the edge of the board switches on/off TX Laster)
>
>
1 GSI X patch wire fixed
SFP1 fixed
 
2 Frankfurt X  
3 Mainz    
4 Cracow   Inverted 125MHz oscillator - fixed
Revision 5
Changes from r3 to r5
Line: 1 to 1
 
Serial Number Location Flash 0R fix Errors, Bugs, Special Features
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
1 Frankfurt FPGA 5 only patch wire for broken Flash-CLK on FPGA 5
>
>
1 Frankfurt FPGA 5 only patch wire for broken Flash-CLK on FPGA 5
SFP1 slot broken (mechanical problem, pressing the SFP on the edge of the board switches on/off TX Laster)
 
2 Frankfurt X  
3 Mainz    
Changed:
<
<
4      
>
>
4 Cracow   Inverted 125MHz oscillator - fixed
 
5 Mainz    
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
Revision 3
Changes from r1 to r3
Line: 1 to 1
 
Serial Number Location Flash 0R fix Errors, Bugs, Special Features
META TOPICPARENT name="TDCReadoutBoardV3"
Changed:
<
<
1      
>
>
1 Frankfurt FPGA 5 only patch wire for broken Flash-CLK on FPGA 5
 
2 Frankfurt X  
Changed:
<
<
3      
>
>
3 Mainz    
 
4      
Changed:
<
<
5      
>
>
5 Mainz    
 
6 GSI FPGA 5 only power supply broken
7 Frankfurt - no communication with FPGA 2
Changed:
<
<
8     no access to Flash 1
9      
>
>
8 Mainz   no access to Flash 1
9 Mainz   DCDC4 (1,8 V) doesn't function
 
10      
11      
 
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Hades Wiki? Send feedback
Imprint (in German)
Privacy Policy (in German)