DAQ Upgrade This document gives an overview of why and how we want to upgrade our HADES DAQ/Trigger System. The upgrade at a glance : ) . Motivation for an Upgr...
CTS and Trigger Logic addresses To all register when accessing vi trbnet add offset A0 CTS Address Bit range Meaning 91 15 downto 0 lvl1 trigger number...
Overview The main idea of the API (application process interface) is that the user should be able to just read and write data and should not take care about the f...
Howto implement to OLD_TO_NEW converter The OLD_TO_NEW converter has the old trigger bus as an input, configured in "DTU mode". On the DaqNetwork it has to emulat...
New Trigger Bus Media General IO interface To make the DaqNetwork independent from any media, a standard IO interface is proposed. The interface follows the pri...
Overview The "normal" TrbNetEndPoint consists of up to 16 TrbNetIOBUF. Special endpoints for dedicated reasons have only a subset of TrbNetIOBUF in order to keep ...
Main.BorislavMilanovic 27 Jul 2009 TRBnet Monitoring System On this page, the new monitoring facility for the TrbNet will be presented. Any user may feel free to...
Overview $ trbnet_full_endpoint.pdf : The hades_full_endpoint entity is the central part to connect to the network. Overview Short description of the ports ...
Connector A (JADDON1) With these connectors (JADDON1 and JADDON2) the Add on board communicates with the TRBv2 board: it receives trigger information and basicall...
HADES Trigger Distribution System DTU/CTU Manual from Eric * DTU_technical_manual.pdf: DTU / CTU manual * DTU_schematics.pdf: Schematics of DTU CTU/DTU i...
The Hades Data Aquisition and Slow Control System Welcome to the DaqSlowControl web used by .HadesDaqSlowControlGroup. Please use this tool frequently and add/cha...