__ Introduction On Request of the HADES MDC group a local EPICS based watchdog unit is built to 1 set and get via network as EPICS client the values of an ext...
DTU in VHDL from Tiago For debugging of the DTU check the DtuDebugRegisters page. RPC DTU debug registers LVL1 DTU_DEBUG_11 DTU_DEBUG_12 DTU_DEBUG_13 = x"00...
The DAQ Network Concept Overview $ NewTriggerBusConcept : The concept for a new trigger bus DAQ Network Modules $ NewTriggerBusCom : The hadcom module ...
Weekly MDC Readout Upgrade Meeting The protocol of the meetings: MdcReadoutupgrademeeting Readout via OEP and MDC Optical AddOn MDC OEP testing, mounting, com...
DAQ Upgrade This document gives an overview of why and how we want to upgrade our HADES DAQ/Trigger System. The upgrade at a glance : ) . Motivation for an Upgr...
Data Access Scheme for Beamtime Apr 2007 The following picture illustrates the data flow for the april 2007 beamtime. This scheme on one hand provides access for...
Detector Control System (a.k.a Slow Control) !! mainly outdated information, has to be updated !! Background Informations The Detector Control System of the H...
List of patches compiled by Marcin on 06.05.2005 Error list in order of tracing them: 1 RESET is output from ETRAX 1 MRESET is input to ETRAX (place manual ...
__ Introduction Issue of this project is to get a docker based EPICS system with: * EPICS IOC connecting to an DT1470ET device * CAENs DT/N147x family ...
Changes needed to compile EPICS environment: set environment: . init_env go to the directory: cd ~/devboard work_2.4/apps/epics/base 3.14.8.2 edit ./configure...
General DAQ All what is written below should be done on hadesdaq computer. Start acquisition Button "Blue_Arrow_Down" "Fast DAQ start". After a successfull ctu ...
Main.KrzysztofKorcyl 19 Sep 2005 RPC board CALIBRATION Calibration, according to NASA definition, is the process of collecting instrument characterization infor...
__ Introduction Systems \" edit)"}% Dreamplug/HadCon2 Combinations * defined in startupProcedures and matched by the IOC code * FTDI ID via: $ sbin/...
HADES I/O Box Introduction Based upon the HadCon2 multi I/O board, the DreamPlug Plug Computer, and the 1 wire based ADC board OwAdc a small, slim, multi ana...
I propose to use the following components: * SPFEIM100_G optical transceiver from Infineon (I ordered 30 of them 2007 01 29 ) * a 100 300Mbits/s SERDES. In...
Readout Setup v1 : AddOnv1 and other outdated information Rossendorf Dec07 discussion In Rossendorf we had a discussion about the MDC readout project. The Rossen...
MDC Upgrade: Cooperation with Yanyu Wang Introduction In the HADES DAQ Upgrade project the MDC Upgrade is an essential part. The expected data rates for heavy ...
Overview The main idea of the API (application process interface) is that the user should be able to just read and write data and should not take care about the f...
Howto implement to OLD_TO_NEW converter The OLD_TO_NEW converter has the old trigger bus as an input, configured in "DTU mode". On the DaqNetwork it has to emulat...
Overview The network protocol is the most critical part of the complete concept. It should match the requirements (low latency), but should be flexible on the o...
MT: again after reboot of r2f 35: Jan 28 19:09:45 r2f 35 ./daq_rdotrig 129 : HwTip on 18000000 not found Jan 28 19:09:45 r2f 35 ./daq_rdotrig 129 : Construction o...
List of outdated pages This entry will service as harbour for all outdated and obsolete topics in the DaqSlowControl Web. Contents Main.JanMichel 12 Dec 2009...
Where to find QA check list file Here: * for August 2011: /u/hades qa/Desktop/QA Check List Aug11/QA_check_list_Au_Au_aug2011.pdf (see also attachement) Whe...
Data Acquisition and Slow Control name of document daqslow.html version 0.3 author M. M nch date 18 07 2000 draft purpose This document proposes a common understa...
IOC for HADES SCS running on Linux Introduction HADES IOC There is an EPICS IOC running under Linux on machine hadesdaq02. Right now, it services * the HV f...
VxWorks boot procedure (hadsc1 and e7had2) The manual boot procedure of the VxWorks is described here (very old manual) The important part of the manual: Before ...
VxWorks VME IOCs for HADES Introduction e7had2 and hadsc1 are the remaining VxWorks OS based EPICS IOCs. This is a collection of informations about this topic. ...
Slow Control Wish and ToDo List Introduction Bugzilla http://jspc22.x matter.uni frankfurt.de/rt * Component: EPICS Todo Wish List Main.PeterZumbruc...
spi_trbv2 The application to set the thresholds for TOF RPC from TRB. It needs the special file with configuration of thresholds(configFile). How To: Log in t...
How to generate jam and tcl files In view of growing number of TRBs the make.pl perl script was made to produce jam files with TDC settings and channels enabled/d...
Here we describe our various AddOn Cards for the TRBv2 HUB AddOn The TRB HUB servers as the trigger fanout module. It has 16 times a 2 GBit/s SFP. The SERDESes a...
Here the TRB Version 1 are listed where they are used and their current status de etrax where status additional information last update 001 cracow Ok ...
TRB Publication List Here we should collect all available presentations/talks/papers Please also put all information about location and date. 2006 * TRBv2_Sc...
Interfaces The TRB Endpoints are all using the same interfaces. There is a media independent interface (MII) on the network side. On the application side of the e...
Streamed Event Building The name "streamed event building" comes from the fact that inside the network there is no place where we can guarantee to be able to stor...
Information on using VHDL Constraints Lattice constraints Constraints for Lattice FPGAs should be located in a separate LPF file, especially if these constraints...