You are here: Hades Wiki>DaqSlowControl Web>HowTo>DescriptionOfEtrax (revision 1)EditAttach
To make TRB working:

* flashTool.tar: Tool to flash the image to TRB

Content of README file:
To flash this image:
   1. set SW1[switch on the board] to A,
   2. type:
      ./boot_etraxfs -d ethX -F -i ./fimage, 
      where ethX is ethernet interface

      If you see something like this:
         Using internal boot loader: INTERNAL_NW - Network boot (default).
         Using internal boot loader: INTERNAL2 - Level2 boot.
         Starting boot...

      and nothing happen, it means that:
         1. you were using wrong ethernet interface(ethX). It should be usually eth0 or eht1.
         2. switch SW1 on the TRB isn't A
         3. there is no physical connection between TRB and the image-develop computer.

      If you see 
         SET_REGISTER
         0xb001a048
         0x000fffff
         SET_REGISTER
         0xb001a050
         0x00000000
         SET_REGISTER
         0xb001a058
         0x000fffff
         PACKET_INFO
         0xc0004000
         0x003da000
         JUMP
         Exiting with code 0
      but after more or less 1 minute you cannot connect with the TRB:
         1. check in the /var/log/messages(as root on the image-develop), if TRB got DHCPACK(DHCP server log)
   3. set SW1 tp 0

-- RadekTrebacz - 03 Jul 2007

Edit | Attach | Print version | History: r5 | r4 < r3 < r2 < r1 | Backlinks | View wiki text | Edit WikiText | More topic actions...
Topic revision: r1 - 03 Jul 2007, RadekTrebacz
 
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Hades Wiki? Send feedback
Imprint (in German)
Privacy Policy (in German)