Where to find QA check list file
Here:
- for August 2011:
/u/hades-qa/Desktop/QA Check List - Aug11/QA_check_list_Au_Au_aug2011.pdf
(see also attachement)
Magnet
If major problems appear, call:
- Wolfgang Knig: 0172/8775049
- Torsten Heinz: 0175/3884066
- Go to Magnet Control Computer in the second floor above the HADES experiment and check computer screen for:
START/VETO
- Go to DAQ monitors
- Read values from Start Display (window not labeled, but the diamond-shaped Start detector is clearly identifiable)
- Take values from RIGHT column, not the left one as shown in the picture.
RICH
- Check Pad mult./evt in the corresponding RICH online monitoring pictures
- Open epics window
- Click on "rich" button
- Click on "Rich HV" button
- Click on "HV Control" button
- Go to the RICH rack in front of the lower counting house
MDC
- MDC
- "HV settings changed", "Thresholds changed" -> ask experts
- "ERROR-BITS" -> check in QA plots (MDC panel, ErrStat tab)
- "Gas bubbler" -> see picture below
- "Interlocks enabled"
- "Gas - System", "Temperature" ???
- MDC Gas-System readings
- Go to the MDC rack in front of counting house
-
- Open epics window ( NOT NEEDED ANYMORE FOR 2012 BEAMTIME, BUT ASK MDC EXPERT TO CHECK THE PRESSURES )
- Click on "MDC" button
- Click on "Mdc gaspressure"
TOF
- Check in your QA plots
- "TOF counts/s " -> check CTS window -> See the six TOF sectors -> Check for scalers during a spill -> estimate average
RPC
- Open epics window
- Click on "RPC" button
- Click on "Gas System" button
- Check values:
- Open epics window
- Click on "MDC" button
- Click on "MDC gas scales" button
- Go to the RPC rack in front of the lower counting house
- Check "Currents in SC"
- Open epics window
- Click on "RPC" button
- Click on "HV" button
- Click on "Monitor (1ua)" button
- 6 different colored histograms appear in two windows -> If the six histograms are more or less the same -> ok!
SHOWER
- Go to the balance near the stairs to upper counting house
- Go to SHOWER rack in front of lower counting house
- open epics window
- Click on "shower" button
- Click on "SHWR HV" button
- Click on "ALL SECTOR" button
Forward Wall
HADES VACUUM
ICINGA
Online Vertex
- Go to lower monitors on QA operator place
- Click "Open VertexMon" button
- Click "Start VRC Server.deskt op" button -> Vetrex Reconstruction pictures pop up
Slow Control (Archiver)
To check if the file archiver is running go to
http://lxg0434:4812
--
RafalLalik - 10 Aug 2011