RamEthernet < DaqSlowControl

You are here: Hades Wiki>DaqSlowControl Web>TDCReadoutBoard>RamEthernet (14 Jul 2005, RadekTrebacz) (raw view)EditAttach

There are two applications:

---++ ram2eth 
   file:///misc/hadaq/cvsroot/rpctrbetrax/eth2file

--response for sending triggers & reading RAM1, RAM2 & sending this data via ethernet. This application takes three arguments:
   i. _IP number of server_,
   i. _number of triggers_,
   i. _boolean value_ -> write(=1) or not(=0) to local file on etrax

 Example(server is running on DEPC152.gsi.de):
   ==/mnt/flash/ram2eth 140.181.66.120 10000 0==
   Etrax is sending in this case 10000 triggers to the FPGA, next sending the data to server, which is localized on 140.181.66.120 and not saving this data   on the local disk (/var/testOutput).

---++ eth2file  
   file:///misc/hadaq/cvsroot/rpctrbetrax/ram2eth

-- response for receiving data from ram2eth and save it to the file 'TDC_data.dat'.

   Except these files there exists the script:

---++Ram2Eth.sh 
-- set up the port B && start the ram2eth application with 2 parameters: 
   i. _number IP of the server_,
   i. _1 or 0_ - save(=1) or not(=0) the data to the local file on etrax.
   This script takes one argument: number of triggers

   Example:
   ==/mnt/flash/Ram2Eth.sh 10000==

   RECAPITULATION:
   One should start:
   A. ==./eth2file== on the machine where the TDC_data should be saved;
   A. ==/mnt/flash/Ram2Eth.sh _num_of_triggers_== on the Etrax
 
-- Main.RadekTrebacz - 12 Jul 2005

Topic revision: r7 - 14 Jul 2005, RadekTrebacz

DaqSlowControl

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Hades Wiki? Send feedback
Imprint (in German)
Privacy Policy (in German)