Here we describe our various AddOn Cards for the TRBv2

HUB-AddOn

The TRB-HUB servers as the trigger fanout-module.
It has 16 times a 2-GBit/s SFP. The SERDESes are in the LatticeSCM40 FPGA.
Fully impedance matched 12-layer PCB.

TRB_HUB1 (small)

ShowerAddOn

The features of the ShowerAddOn alias General-Purpose-ADC-AddOn

  • 96 channels 10-bit ADCs
  • 40/60 MSPS
  • ADC type: AD9212 from Analog Devices
  • low noise, variable gain amplifier at the input (AD8334 from Analog Devices)
  • input voltage range: 275 mV (AC coupled),
  • -3 dB bandwidth: 100 MHz (independent on gain)
  • amplifier noise: 0.74 nV/sqrt(Hz), 2.5 pA/sqrt(Hz)

  • Two 68-pin connectors, each connector contains:
    • 48 analog inputs,
    • 5 LVDS lines (programmable direction)
    • 2 TTL lines (programmable direction)
    • +5V (2 pins), GND (6 pins).
    • Connector type: HDRA-EC68LFDT-SL from Honda Connectors

FPGA: LFE2-70E-5F900C from Lattice

Schematics are finished, layout is finished, we are waiting for the PCB (2008-02-05).

The General Purpose Add on: Short Description

The General Purpose Add on (GP-AddOn) board povides the interface between the TRBv2 (main readout board) and many different signals. For example it can used as interface to the old HADES trigger bus. The GP-AddOn can be easily connected to the TRBv2 board through 2 connectors (QSE-040-01) placed on the back side of the board. The power supply is given to the GP-Addon through the connector's pins. A programmable logic CPLD ( XCR3128XL7VQ100C) is placed on the right hand side and is supported by Xilinx Web-PACK and industry standard CAE tools (Cadence/OrCAD, Exemplar Logic, Mentor, Synopsys, Viewlogic, and Synplicity), using HDL editors with ABEL, VHDL, and Verilog. Design verification uses industry standard simulators for functional and timing simulation. Here we attach the data sheets for further details of the board's component:

General Purpose addon board: front view
GPAddon

General Purpose addon board: back view
GPAddon

General Purpose addon board: block diagram
GPAddon

Pinouts and connectors

-- AttilioTarantola - 09 Oct 2006

I Attachment Action Size DateSorted descending Who Comment
TRB_HUB1_small.jpgjpg TRB_HUB1_small.jpg manage 64 K 2007-10-23 - 14:34 MichaelTraxler TRB_HUB1 (small)
TRB_HUB1.jpgjpg TRB_HUB1.jpg manage 2 MB 2007-10-23 - 14:29 MichaelTraxler TRB-HUB1
gp_addon_back.jpgjpg gp_addon_back.jpg manage 2 MB 2007-07-25 - 21:51 AttilioTarantola GP-AddOn back
general_porpouse_addon.gifgif general_porpouse_addon.gif manage 56 K 2007-07-23 - 17:47 AttilioTarantola general porpouse addon block diagram
gp_addon_front.jpgjpg gp_addon_front.jpg manage 2 MB 2007-07-13 - 14:56 AttilioTarantola General purpose addon board
Topic revision: r22 - 2009-10-27, JanMichel
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki Send feedback | Imprint | Privacy Policy (in German)