HLD Files

Here a list of all taken hld-files should be maintained. Filenames should be given without extension. All files are to be recorded in a new subdirectory

Joern realized that files with 0x90 have not been taken since the corresponding file with entries for registers did not exist. So, default was set, 0xff.

MDC I Sector 0

pulse: A = 3.1 V, width = 110 ns, edge = 23 ns

threshold	pulser	calibration	file name	# events	power consumption	temperature
	off	on	md10062101035	100 k		40 - 56
0x20	off	off	md10062100257	100 k		41 - 57
0x30	off	off	md10062100046	100 k		40 - 56
0x40	off	off	md10062095921	100 k		39 - 56
0x50	off	off	md10062095751	100 k		38 - 56
0x60	off	off	md10062095630	100 k		38 - 55
0xff	off	off	md10062100947	100 k		41 - 57
0xa0	off	off	md10062100840	100 k		41 - 57
0xf0	off	off	md10062100728	100 k		41 - 57
0x70	100 kHz	off	md10062102251	500 k		43 - 57

Layer 3 Wire 50, 59, 67, 75,83 and 90 no signal with pulser

MDC I Sector 1

pulse: A = 3.1 V, width = 110 ns, edge = 23 ns

threshold	pulser	calibration	file name	# events	power consumption	temperature
	off	on	md10062133112	100 k		44 - 58
0x20	off	off	md10062132655	100 k		44 - 58
0x30	off	off	md10062132507	100 k		43 - 56
0x40	off	off	md10062132352	100 k
0x50	off	off	md10062132253	100 k
0x60	off	off	md10062132155	100 k
0xff	off	off	md10062132053	100 k
0xa0	off	off	md10062131955	100 k
0xf0	off	off	md10062131840	100 k
0x70	100 kHz	off	md10062134414	500 k		43 - 57

Layer 3 wire 49 - 64 no signal with pulser

MDC I Sector 2

pulse: A = 3.1 V, width = 110 ns, edge = 23 ns

threshold	pulser	calibration	file name	# events	power consumption	temperature
	off	on	md10062145135	100 k		45 - 56
0x20	off	off	md10062144818	100 k		44 - 55
0x30	off	off	md10062144651	100 k		42 - 51
0x40	off	off	md10062144539	100 k		42 - 51
0x50	off	off	md10062144424	100 k		42 - 51
0x60	off	off	md10062144320	100 k		42 - 49
0xff	off	off	md10062144139	100 k		41 - 48
0xa0	off	off	md10062144232	100 k		40 - 45
0xf0	off	off	md10062144026	100 k		40 - 45
0x70	100 kHz	off	md10062150631 md10062151001 md10062151451 md10062151818	500 k		45 - 58

Layer 3 wire 1 - 16 and 126 no signal with pulser

MDC I Sector 3

pulse: A = 3.6 V, width = 110 ns, edge = 23 ns

threshold	pulser	calibration	file name	# events	power consumption	temperature
	off	on	md10055112455 md10060113138	100 k		44 - 56
0x20	off	off	md10060105247	100 k
0x30	off	off	md10055111342 md10060105710	100 k
0x40	off	off	md10055111810 md10060105914	100 k
0x50	off	off	md10055112022 md10060110039	100 k
0x60	off	off	md10055112248 md10060110130	100 k		44 .- 52
0xff	off	off	md10060110243	100 k		44 - 52
0xa0	off	off	md10060110343	100 k		44 - 52
0xf0	off	off	md10055110315 md10060110437	100 k		44 - 52
0x70	100 kHz only A4	off	md10055115709	100 k
0x90	100 kHz only A4	off	md10055114415	100 k
0x70	100 kHz	off	md10063094725 md10060112402	500 k		44 - 56

Layer 0 wire 14 and 15 and 88 - 91 no signal from pulser

MDC I Sector 4

pulse: A = 3.6 V, width = 110 ns, edge = 23 ns

threshold	pulser	calibration	file name	# events	power consumption	temperature
	off	on	md10055145335	100 k
0x30	off	off	md10055135220	100 k
0x30	off	off	md10055134858	100 k
0x40	off	off	md10055135738	100 k
0x50	off	off	md10055135914	100 k
0x60	off	off	md10055140233	100 k
0x60	100 kHz only A4	off	md10055144907	100 k
0x80	100 kHz only A4	off	md10055144615	100 k
0xff	100 kHz only A4	off	md10055142242	100 k
0x70	100 kHz	off	md10063110437	500 k

Layer 4 wire 57 - 64 no signal from pulser

MDC I Sector 5

pulse: A = 3.6 V, width = 110 ns, edge = 23 ns

threshold	pulser	calibration	file name	# events	power consumption	temperature
	off	on	md10056155552	100 k
0x20	off	off	md10056154827	100 k
0x30	off	off	md10056154526	100 k
0x40	off	off	md10056154215	100 k
0x50	off	off	md10056155213	100 k
0x60	off	off	md10056155319	100 k
0xff	off	off	md10056155427	100 k
0x60	100 kHz	off	md10057102623	600 k		45-57 C
0x70	100 kHz	off	md10063113618	500 k

Layer 2 wire 39 no signal fom pulser.

-- KathrinGoebel - 02 Mar 2010
-- JoernWuestenfeld - 04 Mar 2010