Common Status Register All network devices have one (or more) 32 Bit status registers. These registers will be read out for example once each second using TRBNet....
The DAQ Network Concept Overview $ NewTriggerBusConcept : The concept for a new trigger bus DAQ Network Modules $ NewTriggerBusCom : The hadcom module ...
TRBNet Addresses Here are some suggestions for TrbNet Addresses in the final detector setup. They were choosen based on the following premises: * The addresses...
Network configuration A lot of parameters cn be set using the generics in each top entity. Nevertheless, some of these have to be common for all network devices. ...
Endpoints There are some ready to use endpoints. These endpoints are named accordingly to their kind and number of interfaces: For example "trb_net16_endpoint_0_t...
IPU Data Channel Data Format The request to start readout of the data of a specific event is the same as the trigger information delivered on the LVL1 trigger ch...
Interfaces The TRB Endpoints are all using the same interfaces. There is a media independent interface (MII) on the network side. On the application side of the e...
Media Interfaces For every kind of network medium we need an dedicated media interface. For example there is an lvds interface (200MBit), an optical link interfac...
Streamed Event Building The name "streamed event building" comes from the fact that inside the network there is no place where we can guarantee to be able to stor...
LVL1 Trigger Definitions * All information about LVL1 triggers will be sent in a packet using TrbNet and the optical network. * A fast trigger strobe for ...