RDB Archiver based on CS Studio Detailed Table of Content Introduction (from http://cs studio.sourceforge.net/docbook/archive.png) The CS Studio RDB Archiv...
Detector Control System (a.k.a Slow Control) !! mainly outdated information, has to be updated !! Background Informations The Detector Control System of the H...
__ Introduction Issue of this project is to get a docker based EPICS system with: * EPICS IOC connecting to an DT1470ET device * CAENs DT/N147x family ...
HADES I/O Box Introduction Based upon the HadCon2 multi I/O board, the DreamPlug Plug Computer, and the 1 wire based ADC board OwAdc a small, slim, multi ana...
DCS CPUs and corresponding services Description in Repository: * https://git.gsi.de/HADES/DCS/EPICS/Common/IOC/hades/blob/production/hadesApp/Db/desc_ioc.subst...
IOC for HADES SCS running on Linux Introduction HADES IOC There is an EPICS IOC running under Linux on machine hadesdaq02. Right now, it services * the HV f...
VxWorks boot procedure (hadsc1 and e7had2) The manual boot procedure of the VxWorks is described here (very old manual) The important part of the manual: Before ...
VxWorks VME IOCs for HADES Introduction e7had2 and hadsc1 are the remaining VxWorks OS based EPICS IOCs. This is a collection of informations about this topic. ...
Slow Control Wish and ToDo List Introduction Bugzilla http://jspc22.x matter.uni frankfurt.de/rt * Component: EPICS Todo Wish List Main.PeterZumbruc...
LVL1 Trigger Definitions * All information about LVL1 triggers will be sent in a packet using TrbNet and the optical network. * A fast trigger strobe for ...
The Hades Data Aquisition and Slow Control System Welcome to the DaqSlowControl web used by .HadesDaqSlowControlGroup. Please use this tool frequently and add/cha...
Channel Archiver Introduction The channel archiver is usually running on lxg0434 visible to the GSI LAN Manuals * Channel Archiver Manual * online: h...
When you have DAQ problems, please follow this procedure Checks: 1 Are still events written to tape? 1 Is one crate turned off? (use slow control window to...
Here we collect documentation for the Hades DAQ. Global DAQ issues 1 GeneralDaqOperation 1 DaqCheckList ( things which should be checked before a beamtime)...
List of Concurrent VME CPUs and their MAC addresses DNS names are always: hadcXX, where XX is the number down in the table. No location means: At GSI on Michaels ...
DaqSlowControl Web Preferences The following settings are web preferences of the DaqSlowControl web. These preferences overwrite the site level preferences in ., ...
How to use boards with etrax mcm This boards are accessable at GSI under etrax201 etrax248. How to login Only via telnet: telnet etrax2xx, where xx=01 48 There ...
__ * database_owner_ship provided: 1. Download postgres_partitioning.txt from cs studio@github 1. Since the table sample is already created, optional...
__ Introduction On Request of the HADES MDC group a local EPICS based watchdog unit is built to 1 set and get via network as EPICS client the values of an ext...
Operator Interfaces Introduction Introduction Operator Interfaces are the EPICS clients which connect to the available process variables and show them in a ...
The KISS runcontrol RunControlSoundServer Users Guide 1 http://www hades.gsi.de/~hadaq/doc/aug04/daqop.html Current Documentation for the DAQ operator ...
HADES Network Configuration in Counting House Network Switches After a discussion with Mathias Mnch today (2006 05 18) we can assume the following: * The mai...
__ Introduction The objective is to configure a network switch, D Link DGS 1510 28 L3 switch with 24 RJ45 4 SFP ports to provide 3 independent access blocks of...
__ 1. Download postgres_schema.txt from cs studio@github 1. Since GSI already created the database, skip DROP DATABASE, CREATE DATABASE 1. add client...
__ Introduction Code section to be included directly in front of a section to be hidden at beginning. Can be included via %INCLUDE{"ToolsHiddenSection" section="...
__ 1. Expect postgres_schema.txt 1. Extract GRANT commands and for each user add those GRANTs 1. add client_encoding and "SEARCH PATH" in front 1. cal...
This is a subscription service to be automatically notified by e mail when topics change in this DaqSlowControl web. This is a convenient service, so you do not h...
* This list is now located on the TRB3 webpage. Please edit it there!* Serial Numbercurrent LocationFlash with 0RErrors, Bugs, Special Features 1 Frankfurt X p...
Summary Table: new boards (assembled in 2011) * Tested in July 2014 by C.Wendisch Kathrin Bismark (Sommerstudent) * calibration files md14...hld (if avail...
Eventbuilder status in 2014 here some description of the actual setup before beamtimes Jul14 and Aug14 Eventbuilder servers Hardware lxhadesdaq Central server ...
GeneralInformation general information about event builder machines, services running on those machines and so on. EventBuilderDevelopment information and docum...
TRB Publication List Here we should collect all available presentations/talks/papers Please also put all information about location and date. 2006 * TRBv2_Sc...
Some electronics, DAQ and Detector related conferences we might want to have some contributions at. Date Description Deadline 23.06.13 27.06.13 Anim...
__ Introduction Systems \" edit)"}% Dreamplug/HadCon2 Combinations * defined in startupProcedures and matched by the IOC code * FTDI ID via: $ sbin/...
How to set up parallel operation of TDK Lambda power supplies Only power supplies of the same model ( e.g 8V 150A or 50V 30A ) can be connected to increase the ...
Eventbuilder and TRBnet plugin for DABC Introduction The future application for trbnet hardware for FAIR detector test beams (e.g. CBM, PANDA, R3B) requires to i...
Eventbuilder on Dreamplug Introduction This page collects experiences with hadaq eventbuilder software installed on dreamplug mini pcs System description here o...
List of Boards This should be a complete list of all used boards in the HADES DAQ context. For the running system, such a list is needed to assign the network add...
The DAQ Network Concept Overview $ NewTriggerBusConcept : The concept for a new trigger bus DAQ Network Modules $ NewTriggerBusCom : The hadcom module ...
Interface between Etrax and FPGA on TRB ("TrbNet edition") Interface The interface between Etrax and FPGA on the TRB2 uses 2 data ports (Port B and C) of the Etr...
DAQ Upgrade Installation of TRB, AddOn, Network... Trigger Distribution * RPC: One PECL LVDS converter on each sector * Shower: Same distributor board a...
SlowControlWishListToDoIntro Introduction This collection is intended to list open wishes and ToDos as a reminder and overview. * RECOMMENDED: Bugzilla at ...
Where to find QA check list file Here: * for August 2011: /u/hades qa/Desktop/QA Check List Aug11/QA_check_list_Au_Au_aug2011.pdf (see also attachement) Whe...
Status of eventbuilder for beamtime 2012 Here documentation of setup and changes Eventbuilder machines Hardware lxhadesdaq central machine lxhadeb01 Previous ...
When restart of the DAQ and reprogramming of the FPGAs does not help First try to login to etraxpXXX Check if the home directory (ls /home/hadaq/) on the Etrax is...
TRB (TDC Readout Board for RPC and other tasks) Direct Link to TRBv3 New (Jan. 2011) development for TDC applications TDCReadoutBoardV3 Direct Link to TRBv2 T...
ICINGA General setup Icinga is a system and network monitoring application. It watches hosts and services that you specify, alerting you when things go bad and w...
Network Structure Our Foundry 10Gbit switch is "divided" into two VLANs: GSI VLAN and our private HADES VLAN. All the TRBs, switches and other network devices in ...
Nagios DEPRECATED! NOTE: This page is deprecated, since 2011 we use icinga for monitoring See new status on page IcingaMonitor . Main.JoernAdamczewski 09 Feb...
Event Builder Development Short Intro The aim of the Event Builder (EB) is to receive subevents from subsystems and to build a complete event out of them. EB con...
General DAQ All what is written below should be done on hadesdaq computer. Start acquisition Button "Blue_Arrow_Down" "Fast DAQ start". After a successfull ctu ...
Up to date information about all ongoing and planned work Please update this list regularly! this will help all of us to keep a better overview. Logbook * 12 ...
Weekly MDC Readout Upgrade Meeting The protocol of the meetings: MdcReadoutupgrademeeting Readout via OEP and MDC Optical AddOn MDC OEP testing, mounting, com...
Unpacking, hld unpack_hld.pl The script unpacks the hld file (taking into account big/little endian byte ordering) and stores the output in the array. User can u...
All tables can be edited directly. Use the "Edit table" button underneath each table! Logs for all tests Summary Table Summary table of all tests done Plane ...
Here a list of all taken hld files should be maintained. All files are to be recorded in: hadaq@lxhadeb01:/data01/data MDC I Sector 0 MDC I Sector 1 MDC I Sec...
test of MDC II performed day: 29.03.2011 We have collected only calibration events, by setting: trigger type 9 on and pulser 10Hz. Threshold has been set to 40 ...
Here a list of all taken hld files should be maintained. All files are to be recorded in: hadaq@lxhadeb01:/data01/data MDC III Sector 0 MDC III Sector 1 MDC I...
Here a list of all taken hld files should be maintained. All files are to be recorded in: hadaq@lxhadeb01:/data01/data MDC IV Sector 0 MDC IV Sector 1 MDC IV ...
The plot shows the bit distribution (11 bits of the dataword) vs MB. If there is a hot spot of a read stripe (like in this example), it means that a MB deliver al...
Here it follows a list of steps which have to be performed in order to poof the electronics on the MDC: 1) Acquire a file (.hld) and make its analysis as describe...
Olga and Vladimir's list: noisy and inactive channels by 317 day (B0) and 319 day (B1) from Nov'10 data. NOISY: =============== S M Mb Ch Excess =========...
1) Within February 2011: Test the FEE on P3S2 and P4S2 (Chambers which are on the floor of the cave (03.02.2011). Next week, on Monday (06.02) Torsten will prep...
Check if each MBO deliver the right amount of data and if there are TDCs (channel) missing. * calibration: * calibration slope: The calibration slope...
Check that for each sectors the plots tdcvsmb shows data and the hardware reacts to the change in thresholds. You find this plots in the TBrowser monitorDir ...
How to check data read out from OEP's 1. Login to lxhadesdaq Use vncviewer / krdc to connect to the running vnc session on lxhadesdaq. With vncviewer use vncview...