This is only important for setup. During beamtime it would be a bit late.

Testing the cabeling:

Example 1:

Plotted "crosstalk" in one detector. it is visible, that channel 20-23 is swapped with 24-28. Channel 29 is missing completly, channel 86 seems a bit noisy.
miscabled

Example 2:

Plotted "crosstalk" in the other detector. Clearly visible the swapped 8 channels at channel 80-96. The square-like structure indicates too low treshold in (at least) one of the LEDs Another explanaition would be that one PMTs sees some light.
Example 4

Example 3:

Here the teh correlation between two hodoscopes is plotted. Its immedeatly visible, that several things are wrong here: On detector which is plotted on the y axis, two 4 channel blocks are swapped (see Example 1). On the X axis, the last two 8 chn blocks are swapped, and in one block the cable is plugged in the wrong way (flatribboncable). This is also visible in the width for this signal, because the TDC sees inverted signals for these channels..
Example 2

Example 4:

Thsi is the profile for one detector, taken with a Sr90 source. the comb-like structure comes from the geometrical overlap of the fibers. The 16 channels in the middle, which a have a significant lower intensity, are not triggered correctly. The OR out of the LED was not working correctly.
Example 3

Example 5:

Here all the cables are fixed (except the missing channels, noise, usw).
Example 5


Example 6:

  • Left-right correlation with some swapped channels:
    clearly visible are some channels which have been swapped (most likely) in the cable connectors or on the LED board. Do not mind the missing channels and the channels which have always fired. The later ones are time reference channels.
    Left-right correlation with some swapped channels

  • Corresponding picture for one side crosstalk:
    swapped cables one one side
    corresponding picture for one side crosstalk

  • Corresponding picture for other side crosstalk:
    swapped cables one the other side of the detector
    corresponding picture for other side crosstalk

-- BjoernSpruck - 27 Jul 2007
I Attachment Action Size Date Who Comment
CT_S_swap.pngpng CT_S_swap.png manage 30 K 2007-07-27 - 09:46 BjoernSpruck corresponding picture for one side crosstalk
CT_V_swap.pngpng CT_V_swap.png manage 28 K 2007-07-27 - 09:47 BjoernSpruck corresponding picture for other side crosstalk
C_swap.pngpng C_swap.png manage 26 K 2007-07-27 - 09:45 BjoernSpruck Left-right correlation with some swapped channels
rpc_test_1vs2.pngpng rpc_test_1vs2.png manage 5 K 2006-03-01 - 15:49 BjoernSpruck Example 2
rpc_test_cr.pngpng rpc_test_cr.png manage 27 K 2006-03-01 - 16:02 BjoernSpruck Example 5
rpc_test_h_profile.pngpng rpc_test_h_profile.png manage 16 K 2006-03-01 - 15:50 BjoernSpruck Example 3
rpc_test_hcr.pngpng rpc_test_hcr.png manage 16 K 2006-03-01 - 15:44 BjoernSpruck miscabled
rpc_test_vcr.pngpng rpc_test_vcr.png manage 17 K 2006-03-01 - 15:51 BjoernSpruck Example 4
Topic revision: r3 - 2007-07-27, BjoernSpruck
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki Send feedback | Imprint | Privacy Policy (in German)