contains all information about the mdc parameters for the 1st Aug04Sim DST production

Mdc Setup

• aug04mdcsetupsimulmagnetic.txt: mdc setup, magnetic field on, simulation

• aug04mdcsetupsimulnomagnetic.txt: mdc setup, magnetic field off, simulation

Mdc Digitizer

signal speed not changed --> signalspeed: f 0.004

layer efficiencies changed:
(sector*24)+(module*6)+layer
s=0, m=0 -> layer=0,1,2,3,4,5
s=0, m=1 -> layer=6,7,8,9,10,11
..
s=0, m=3 -> layer=18,19,20,21,22,23
s=1, m=0 -> layer=24,25,26,...
thus the order is like this
I1 all layers, II1 all layers, III1 all layers, IV all layers
I2 all layers, ....

efficiency information used:

• http://www-hades.gsi.de/~mdc/aug04/LocalWWWAug04/data/be04252133909_mdceff/be04252133909_Eff.pdf
  
• http://www-hades.gsi.de/~mdc/aug04/LocalWWWAug04/data/be04252155942_mdceff/be04252155942_Eff.pdf
  
• @lxg0424: /data2/root/CaCa/Sep04/TcutTuned/be04273011311_Eff.pdf
  
• output from mdc_eff
  

written to oracle:

layEff:  f \
  1.000, 0.900, 0.800, 1.000, 0.900, 0.900, 0.900, 1.000, 1.000, 1.000, \

  1.000, 0.900, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 0.000, 0.000, \

  0.800, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 0.800, 1.000, 0.800, 1.000, 0.800, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 0.800, 1.000, 1.000, 1.000, 0.900, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 0.700, 0.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 1.000, 0.900, 0.900, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, \

  0.200, 1.000, 1.000, 1.000, 0.900, 1.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, 1.000, \

  1.000, 1.000, 1.000, 1.000

signalspeed:  f  0.004

MdcCal2ParSim

version 331 validated for projects 7000-7003

description:
GARFIELD, HV=1750,1800,2000,2200, threshold 10 %, slope 10 , cut at 110,120,260,370 , smoothed calibrat ion parameters for CAL2

comment: no other parameters available

MdcCellEffProduction

version 332 validated for projects 7000-7003

description:
GARFIELD, HV=1750,1800,2000,2200, threshold 10 %, slope 10 , cut at 110,120,260,370 , smoothed Cut valu es for Digitizer for cell efficiency

comment: no other parameters available

WireStat Container

aug04 mdc wire status according to calparraw container, bitflip mbos additionally set to status -3 (==wire connected and dead), only simulation

version 333

-- YvonnePachmayer - 14 Aug 2005