The smoked TRB (Serial No. 5) is in repair. After removing the DC/DC converters (48V, 2,5V, 3.0V) there is no short-circuit anymore and the ETRAX is working again. The replacement FPGA were delivered today (2005-07-11) and will be soldered tomorrow.

Removed pads (due to unsoldering):

pinn function
AB22 GND
AA22 x
AB21 x
AB16 x
AB04 x
Y1 x
V1 x
A2 x

2005-07-13

After resoldering the FPGA, the ETRAX-chip is not working anymore. This is the second Axis-Chip, which is defective after soldering in the vapor-phase reflow-oven.

2005-11-09

New AXIS-ETRAX-chip was soldered "by hand". The processor is working and network connection is established, but I can not load the FLASH. Strange!

-- MichaelTraxler - 11 Jul 2005
Topic revision: r3 - 09 Nov 2005, MichaelTraxler
 
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Hades Wiki? Send feedback
Imprint (in German)
Privacy Policy (in German)